All Categories
oil containment device
oil recovery device
Oil Storage Equipment and Alongside Transfer Gear
Environmental Protection Vessel and Oil recovery Vessel
Other Related Oil Pollution Treatment Devices
   Location:Home Products oil recovery device oil skimmer

INTRODUCTION

Weir skimmer recovering oil through separating oil water with weight

PRINCIPLE

 Weir skimmer consists of a floatable head,a power pack put on the deck of a boat or the bank and liking hoses between the head and the power pack.

A floatable head equipped with camel,put the brim of oil gathering into oil gathering into oil that on the oil water interface.The oil can be transported to oil gathering and then water keeps off outside.Oil that has been drew out under gathering and into the oil storage device though hoses.Equipped with remote hydraulic system,adjust place of brim accurately to oil water interface.

 STRUCTURE

Skimmer equipped with transfer pump,it is suitable for transferring all viscosities of oil.Hydraulic motors drive pump,pump rate can be adjust,speed suits the oil to flow in the gathering.The pump also can reverse and obviate barrier,in case pump will be locked by garbage or large oil bulks.

It is suitable for recovering all viscosities of oil and any oil slick thickness

Draft and weight of skimmer is light,camels distribute have the stable buoyancy,enable the skimmer has the good wave-response,It is widely used in spill oil waters such as river,harbour,off-shore petroleum platform and ship salvages.

While working the power pack which was put on the board or on the bank.Supply hydraulic power to the skimmer.Hydraulic value can also control hydraulic system pressure.The power pack have two kinds.One is diesel engine.The other is electromotor.Diesel power pack was equipped with oil tank and start up by electricity.The electromotor power pack has guards against explosions the electrically controlled box.

 

Model

YS5

YSYB50

ZKX300

MAX recovering rate(m3/h)

5

50

30

Skimmer

Draught(mm)

285~300

610~640

 

Dimension(m)

1.2*1.1*0.5

1.96*1.72*1

0.8*0.62*0.15

Weight(kg)

52

400

6.5

Diesel

Power pack

Power(kw)

3.7

21

32

Dimension(m)

0.72*0.68*0.82

1.4*1*1.34

3*1.7*1.6

Weight(kg)

110

750

1980

Hydraulic hose

---

4*20m

 

Absorbent hose

1*DN38*12m

---

1*DN76*20m

 

 

Head Office Phone:0086-532-85896353   Fax: 0086-532-85896353                                                                                                         

Foreign trade department  Phone :0086-532-87604562   FAX:0086-532-87604522        E-mail:eb@qdgmhb.com
Address:Room 401,Xiangdao Building , No.77,Hong Kong Zhong Road, Qingdao, China.